Porsche 928 RDK capteur de pression des pneus Dummies - 2 pièces (=set)
Since 1990, the Porsche 928 has been equipped with modern tire pressure sensors RDK (Reifen Druck Kontrol) that monitor the tire pressure.
Two sensors are mounted per wheel. These sometimes break and are very expensive to replace.
The sensors will have to be disassembled before powder coating your wheels again. These dummies can then be mounted instead of the original sensors.
The nuts and dummies have an anodized layer, which gives them extra long protection against corrosion, unlike the original nuts. Even though the nut is still good for reuse, it is still wise to use our new nuts.
Disassembly and assembly
To remove the sensors, first remove the tire from the rim, then the sensor can be removed using special Porsche tools. (see image) The dummy can be reassembled with this original tool.
According to the Porsche manual, the tightening torque of the mounting nut is 20 Nm
Numéros de pièces :
Yes we have the tools too
https://928-944parts.com/products/porsche-928-tools-pdksensor-and-of-sensornut
NB! There are two sensors in each rim!
Convient pour :
Porsche 928 S4/GT/GTS - 1990-1995
Contents:*
2x tire pressure sensor dummy
2x nut
2x joint torique
Tags :
problem, replace tire pressure sensors, repair, powder coat rim, RDK nut