Porsche 924, 928, 944, 968 Torque tube revision, new!

If you hear a screaming sound under your 924/944/968/928 come from, then the Torque Tube Lagers may be worn out.

This sound is available both at stationary and while driving. The sound will not decrease over time, ultimately the bearing can fall completely apart. Unfortunately, greasing or lubricating is not possible, you just don't get there.

A torque tube has 3 or 4 bearings that are worn out after the many kilometers in 40 years.

After replacing these bearings, the ashes are quiet again and you can enjoy your Porsche more. 

Our preference and also that of many customers is to overhaul your own Torque Tube instead of working with an exchange system.  This costs us a day lead time.

Expansion Torque Tube

To develop the Torque Tube, the exhaust, gearbox, clutch and the entire rear axle must be expanded. It usually costs and install 10 to 14 hours of work. This depends on how stuck everything is. With a lot of rust it becomes difficult to get the bolts loose. We can of course also do this for you.

Solution révolutionnaire 924/944/968

Well I have good news for you, the rear axle can stay. The Transaxle tube can simply stay under your car.

We have developed a method and tools with which we can replace the bearings of the Transaxle without getting the Transaxle from under the car.  

An additional advantage is that the car does not have to be extra aligned, because the wheel suspension has not changed.

It is still a lot of work, but it is now much easier and the risk that it will not work is almost zero. Disassembling a rear axle has the risk of failure.

We now have so much experience with this repair that we can even make a fixed price for it, an incredibly low price compared to the conventional method.

So not 2500 euros, but Only 1599 euros incl VAT.  This price applies to the 944, 944S, 944S2, 924S, 924.

Revis Torque Tube

For overhaul, special tools and knowledge are needed to properly de and mount the axis. For this we made a special setup with a press. Some people think it is possible with a hammer.

In addition, we have used torque tubes in stock if your torque tube can no longer be overhauled. This can happen if damage has been caused to the ashes.

Contact us to request a revision. This can be through contact us Or add this product to your trunk and pay for it for free. 

Prix de révision*

*A partir de prix sujets à modification

Comment reconnaître les roulements de tube de torsion usés ?

• Sulting noise from the middle tunnel during driving/stationary
• Turn the gear lever in free. Press the clutch pedal. The ash will then turn out slowly. The sound then decreases until the axle is stationary and the sound is gone. If this is a clearly screaming sound, the Torque Tube bearings are worn out.
• Regardez l'une de ces vidéos :
• Or drives visit us for a review

Pourquoi avons-nous procédé à une révision ?

• Shipping Torque Tube is possible
• Nous utilisons des roulements de très bonne qualité
• We have a good number of used Torque Tubes in stock
• If desired, the clutch can also be replaced with this repair. For this we have the required parts in stock
• With the 928 automatic transmission it is wise to immediately replace the old Flex Plate clamp with our new clamp.
• Nous disposons d'une grande expérience pour faire de chaque réparation un succès.
• It is wise to take a good look at other parts that may need to be replaced. The de- and assembly of the Torque Tube takes a lot of time, making it more efficient to replace more parts.
• Nous pouvons vous conseiller à l'avance sur la meilleure approche à adopter pour votre Porsche.

Qu'est-ce qu'un tube de torsion ?

The Porsche 924, 944, 928 and 968 are equipped with a torque tube. This is an axis that connects the motor with the gearbox. (see image) In this "tube" "are bearings (no. 11 drawing) that in the long run. This will cause a howling sound that can be experienced as annoying.  

Can I also use my Torque Tube myself?

Yes this is certainly possible, but it is a big job, also for an experienced key. In addition, having the right tools and a lift bridge is necessary.

Contact us to request a revision. This can be through contact us.

Tags : 

rebuild, repair, overhaul, repair, transaxle, axle, clutch, crankshaft ring, powertrain, service, sound, play, gearbox oil, drivetrain, shifting, flexplate problem

Numéros de référence :