Even more direct steering characteristics in your 928

The Porsche 928 is a fantastic driving car with good steering features. Unfortunately, this can be very different after 30 years. It is then possible that your wheelhouse buses are worn out. You can replace it with original Van Porsche, but your steering characteristics can get even better! What these buses are and how we can improve this, we will tell you in this article.

The steering house of the 928 hangs under the subframe of the engine. The wheelhouse is attached with rubber buses that bolts are sitting through. The rubber buses dry out due to old age and can tear them. It also often happens that a 928 is bothered or suffered from oil leakage of, for example, the Carter. This puts oil on the rubbers that are then affected and lose their strength. 

Discovering worn rubbers is difficult to see unless you have a bridge. It is noticeable in the steering behavior of the car. If you send in for a bend, the front wheels should actually be immediately
respond. If this does not happen immediately, but after, for example, 10 ° steering rotation, the wheelhouse buses may be worn out. If this is much more, it may be that your hardex coupling is worn out. This is often not noticeable, because it is slowly wearing. Sometimes you don't have it for a number of years until you find out that a friend's car is sending very tightly. 

The solution to all these problems is fairly simple due to the use of aluminum wheelhouse buses. These aluminum buses come instead of the rubber buses. These buses are made with a narrow tolerance, so that they fit perfectly in the wheelhouse. Because the buses are made of solid aluminum, there are no more play and you get a more direct steering feeling. In addition, you also feel better what happens with the wheels, because this is no longer filled by the rubbers in the wheelhouse. In addition, the buses go for life through the use of aluminum.

The assembly of the buses is relatively easy to carry out if you have a bridge or a well. Because the wheelhouse only has to drop, no alignment is needed, because the rail rods remain mounted. Of course we can also do this for you. Then go to www.garagedeloods.nl